2004 Toyota Sienna Xle 7 Passenger

Official recalls

• Tires

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The affected vehicles have a spare tire carrier assembly mounted under the vehicle whose attachment cable may corrode due to high concentrations of road salt splashing onto the spare tire carrier.

  Remedy: Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.

  NHTSA campaign: 14V273000

• Engine And Engine Cooling

  TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.