1991 Mercury Sable Ls

Official recalls

• Suspension

  THE ARC WELDS ON THE SWAY BAR BRACKET, WHERE IT ATTACHES TO THE STRUT RESERVE TUBE, DID NOT FUSE PROPERLY.

  Remedy: MONROE DEALERS WILL REPLACE THE STRUT FREE OF CHARGE.

  NHTSA campaign: 94E036000

• Vehicle Speed Control

  VEHICLE DESCRIPTION: VEHICLES EQUIPPED WITH 3.8L ENGINES AND ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE FOLLOWING STATES: ALASKA, COLORADO, IOWA, IDAHO, ILLINOIS, INDIANA, KANSAS, MASSACHUSETTS, MAINE, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NORTH DAKOTA, NEBRASKA, NEW HAMPSHIRE, NEW YORK, OHIO, PENNSYLVANIA, SOUTH DAKOTA, VERMONT, WISCONSIN, AND WYOMING. WATER CAN ACCUMULATE WITHIN THE SPEED CONTROL CABLE CONDUIT. IF ENOUGH WATER ACCUMULATES, IT COULD FREEZE WITHIN A LOW AREA OF THE CABLE ROUTING WHEN EXPOSED TO A LONG TERM COLD SOAK AT TEMPERATURES AT LEAST SEVERAL DEGREES BELOW FREEZING.

  Remedy: DEALERS WILL ADD A BOOT TO THE SPEED CONTROL CABLE.

  NHTSA campaign: 97V025000

• Wheels

  CHILDREN CAN ACCIDENTALLY LOCK THEMSELVES IN THE FOOTWELL AREA OF THE REAR-FACING THIRD SEAT, OR IN THE STORAGE COMPARTMENT IN STATION WAGONS NOT EQUIPPED WITH AN OPTIONAL THIRD SEAT. ONCE THE COMPARTMENT IS CLOSED IT CANNOT BE OPENED FROM THE INSIDE.

  Remedy: REPLACE THE SELF-LATCHING ASSEMBLY CURRENTLY USED IN THE REAR STORAGE COMPARTMENT WITH A LATCH ASSEMBLY THAT CAN ONLY BE CLOSED WITH A KEY.

  NHTSA campaign: 92V065000

• Structure

  VEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN CONNECTICUT, DELAWARE, DISTRICT OF COLUMBIA, ILLINOIS, INDIANA, IOWA, KANSAS, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEBRASKA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGNIA, AND WISCONSIN. THE REAR LOWER SUBFRAME MOUNT PLATE NUT CAN EXPERIENCE STRESS CORROSION CRACKING IF SUBJECTED TO LONG TERM EXPOSURE TO ROAD SALTS. THIS CAN RESULT IN FRACTURE AND LOSS OF THE STRUCTURAL INTEGRITY OF THE SUBFRAME MOUNT ATTACHMENT. DETACHMENT OF THE BODY MOUNTS AT THE REAR CORNERS OF THE SUBFRAME, WHICH SUPPORTS THE ENGINE AND TRANSMISSION, ALLOWS THE REAR CORNERS OF THE SUBFRAME TO DROP.

  Remedy: DEALERS WILL INSTALL SUBFRAME REAR MOUNT BOLTS, REINFORCEMENT PLATES, AND PLATE NUTS.

  NHTSA campaign: 98V323000