1999 Land Rover Range Rover

Official recalls

• Power Train

  VEHICLE DESCRIPTION: CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." WATER CONTAMINATION OF THE AUTOMATIC TRANSMISSION OIL CAN LEAD TO VARIOUS FAILURE MODES OF THE TRANSMISSION. ONE OF THESE FAILURE MODELS RESULTS IN INCORRECT OPERATION OF THE PARK LOCK FUNCTION THAT COULD ALLOW A VEHICLE TO ROLL AWAY IF PARKED WITHOUT THE HANDBRAKE PROPERLY SET.

  Consequence: UNINTENTIONAL VEHICLE MOVEMENT COULD RESULT IN A CRASH OR PERSONAL INJURY.

  Remedy: DEALERS WILL CHECK THE PARK LOCK FUNCTION; REPOSITION THE AUTOMATIC TRANSMISSION BREATHER TUBE; AND TEST THE AUTOMATIC TRANSMISSION FLUID AND FLUSH IF NECESSARY.

  NHTSA campaign: 00V377000 · 2000-11-16

• Vehicle Speed Control

  VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE CAST ALLOY THROTTLE BODY IS HEATED BY FLUID BLED FROM THE COOLING SYSTEM, TO PREVENT ICING IN EXTREMELY COLD WEATHER CONDITIONS. THIS FLUID PASSES THROUGH A SMALL ATTACHMENT (PLATE) TO THE THROTTLE BODY, WHICH UTILIZES A CORK GASKET. THE CORK GASKET HAS PROVEN TO BE UNRELIABLE IN THIS APPLICATION. CONSEQUENTLY, COOLANT FLUID CAN LEAK FROM THE INTERFACE BETWEEN THE DE-ICER PLATE AND THE THROTTLE BODY.

  Consequence: SHOULD THIS COOLANT COLLECT ON HIGH TEMPERATURE REGIONS OF THE ENGINE, THE COOLANT FLUID COULD IGNITE.

  Remedy: DEALERS WILL REPLACE THE THROTTLE BODY GASKET, DE-ICER ATTACHMENT, AND SECURING HARDWARE.

  NHTSA campaign: 00V329000 · 2000-10-16

• Engine And Engine Cooling

  VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. COOLANT SYSTEM LEAKS HAVE BEEN IDENTIFIED IN AREAS WHERE THE COOLANT COULD BE SUBJECTED TO ELEVATED TEMPERATURES.

  Consequence: CONSEQUENTLY, THE FLUID COULD IGNITE CAUSING AN UNDER-HOOD FIRE.

  Remedy: DEALERS WILL MAKE A SERIES OF MODIFICATIONS TO SEVERAL UNDERHOOD HOSE COMPONENTS TO ELIMINATE THE RELEASE OF ENGINE COOLANT.

  NHTSA campaign: 00V328000 · 2000-10-16

• Electronic Stability Control

  VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE LOADING CONDITIONS ON THE VEHICLE'S LEFT SIDE ENGINE IDLER PULLEY CAN EXCEED THE MAXIMUM CALCULATED FIGURE OF THE ORIGINAL DESIGN SPECIFICATION. THE MATERIAL OF THE PULLEY CAN FRACTURE AND ULTIMATELY FAIL. FAILURE OF THE PULLEY MATERIAL CAN CAUSE THE PULLEY TO THROW OFF THE SERPENTINE BELT.

  Consequence: THIS COULD RESULT IN A LOSS OF ENGINE AUXILIARY FUNCTIONS (POWER STEERING, WATER PUMP, ALTERNATOR, AIR CONDITIONING AND ACE).

  Remedy: DEALERS WILL INSTALL AN IMPROVED IDLER PULLEY.

  NHTSA campaign: 00V142001 · 2000-10-16